Seat Help Please?
18 Mar 2015 22:03 #11
by Geno
Replied by Geno on topic Seat Help Please?
The 3 sets of holes I'm talking about that are adjustments are in the rear pan for the tractor. The part that bolts to the hinge to flip it up. 
Welcome to the Stables!
Please Log in to join the conversation.
19 Mar 2015 03:46 - 19 Mar 2015 04:06 #12
by Trouty56
Bob T
Adams County Pennsyltucky
"One, that's easy to remember. It's the first number in the alphabet...." - Barney Fife
Replied by Trouty56 on topic Seat Help Please?
The seat only has one set of holes that fit....On the diagram I posted they are 4 1/2 back from the front and 11 1/2 back from the front....so look at the spring hole and measure 4 1/2 inches towards the steering wheel.....that will be the front of the seat. The seat you have may be the same. Just drill new holes in the spring......
I'll look at the Charger I have....see where I have it bolted.....I have springs on it also.....
Just remembered...it has the 2 piece seat......
I'll look at the Charger I have....see where I have it bolted.....I have springs on it also.....
Just remembered...it has the 2 piece seat......
Bob T
Adams County Pennsyltucky
"One, that's easy to remember. It's the first number in the alphabet...." - Barney Fife
Please Log in to join the conversation.
19 Mar 2015 07:18 - 19 Mar 2015 07:22 #13
by M Bailey
Major
"I refuse to join any club that would have me as a member." Groucho Marx
Replied by M Bailey on topic Seat Help Please?
The last seat I bought was one of these for my 416-8 from ASC
LINK
With this bolt pattern
Just over $50 shipped. Read the reviews.
On edit, my son bought one of these for his (my old) JD210 and likes it as well.
With this bolt pattern
Just over $50 shipped. Read the reviews.
On edit, my son bought one of these for his (my old) JD210 and likes it as well.
Major
"I refuse to join any club that would have me as a member." Groucho Marx
Please Log in to join the conversation.
19 Mar 2015 18:40 #14
by FewMoreMiles
to everyone once again. You guys are the best. MBailey...that's the exact seat I have been looking for. Ordering it now. Thanks!!
Replied by FewMoreMiles on topic Seat Help Please?
to everyone once again. You guys are the best. MBailey...that's the exact seat I have been looking for. Ordering it now. Thanks!! Please Log in to join the conversation.
20 Mar 2015 09:01 #15
by GT 14
Replied by GT 14 on topic Seat Help Please?
M Bailey wrote: The last seat I bought was one of these for my 416-8 from ASC LINK
With this bolt pattern
Just over $50 shipped. Read the reviews.
Looks like a nice seat for the $, might order one myself.
On edit, my son bought one of these for his (my old) JD210 and likes it as well.
1969 GT-18
1978 C-101
1983 C-225
1978 C-101
1983 C-225
Please Log in to join the conversation.
25 Mar 2015 22:58 #16
by FewMoreMiles
Replied by FewMoreMiles on topic Seat Help Please?
MBailey and GT14, the mid back seat arrived from Agricultural Supply and was installed yesterday. Shipping was nearly as much as the seat itself at $22, but for the money, this was a great buy. I thought I had a photo of it installed, but I must have taken the pan and hood off the tractor before snapping a photo. Thanks again for everyone's input on this subject...I searched high and low for a seat that would work, and this surely fits the bill!
Please Log in to join the conversation.
26 Mar 2015 07:33 #18
by M Bailey
Major
"I refuse to join any club that would have me as a member." Groucho Marx
Replied by M Bailey on topic Seat Help Please?
Glad you like the seat Miles! Shipping charges are a higher than last year, I read an article a while back that UPS and FedEx were going to start charging by package volume instead of weight. 
Major
"I refuse to join any club that would have me as a member." Groucho Marx
Please Log in to join the conversation.
26 Mar 2015 07:42 #19
by rmaynard
Bob Maynard
New Windsor, Maryland
1996 416-H
1977 B-100 8-Speed (worker)
1977 B-100 8-Speed (show tractor, built from scrap)
1976 B-60 8-Speed
1968 Commando 8
1967 857
1961 701
If you don't have time to do it right, when will you have time to do it over?
Replied by rmaynard on topic Seat Help Please?
I know where you can get one of these, but it's pretty pricey.
$350.00 plus shipping!
$350.00 plus shipping!
Bob Maynard
New Windsor, Maryland
1996 416-H
1977 B-100 8-Speed (worker)
1977 B-100 8-Speed (show tractor, built from scrap)
1976 B-60 8-Speed
1968 Commando 8
1967 857
1961 701
If you don't have time to do it right, when will you have time to do it over?
Please Log in to join the conversation.
26 Mar 2015 07:46 #20
by Geno
Replied by Geno on topic Seat Help Please?
That one is beautiful. 
Welcome to the Stables!
Please Log in to join the conversation.
Time to create page: 0.114 seconds