Snow Blade Attachment on a 1973 Raider 12

I have a 41" (according to tape measure) snow blade that I purchased from Geno along with my 1973 Raider 12. The deck lift mechanism is a solid rod, and is larger in diameter than the hole(s) in the snow plow mid mount plate. For some reason, it appears that the rear mount rod on the blade itself is too large a diameter for the Wheelhorse rear mount attachment. Any advice on this? Have always had the newer tractors and attachments, and everything was pretty much factory mated and easy to work with. Not sure if something is missing, or if I am holding my head wrong during install. Really like this Raider 12, and especially this cool little original plow with serial numbers and old style "wheelhorse" written on it Look forward to a clean restoration of the two! Thanks guys and gals!

You don't use the piece sticking out... there's a link that goes from the arm (you can see the hole) down to the plow frame.

Tis a common mistake made by many (including me)

The deck lift has a hole about 4 inchs back from the deck lift pin. Attach a short chain to that hole and attach the other end to one of the holes in the lift tab on the plow. This set up is for a floating plow setup. If you want to add more down pressure to the plow you need to remove the T bar, or deck lift and add a solid lift bar in its place. I added some pics.

More pics

Thanks guys...that makes a bit more sense. I think I have the solid link on my 314. Didn't think I would use anything other than the deck lift itself on this blade. Looked like it fit so well. Thanks for the quick replies!

Hi Geno...no worries. Thinking about running over to your Tractor Supply this afternoon to be quite honest. I have visited two local locations, as well as several farm supply type stores, and can't find the seat I want. I found low backs, and I found huge seats but nothing in between. I found this in my snow plow manual last evening...is this the lift link bar you are referring to? Thanks for the follow up! Hope you were able to enjoy the weather yesterday

Geno wrote: Sorry Jeff.

We were in a hurry and I forgot to give you a lift link. I have a stack of new ones here if you're in the area sometime.

I love it. Having stacks of parts. That would be awesome.

I'm with you on that idea