618Z Deck Issues

My 618Z Deck seems to have a height issue. I have to mow everything in either the last position at the top or the 2nd to last position. If not it might as well be a dozer blade.

Any Suggestions?

Could it have the wrong length height adjusters on it?

Thank You!
Bill

Wait a Minute! Have I found something that Geno does not know? lol! Yes it is an Actual WheelHorse Deck. The Model Number is 0542SY01 11458 Thewn it has a Made in the USA with the number 9108. There is Zero Toro Branding on the entire unit. I have a picture of the Tag if you want it. Thank You

Damn! Any Suggestions on where to go or who to call?

Oh Yeah. It is a 616Z I am a potato head! lol

Although not the traditional wheel horse, Id think there would be an adjustment probably on the hanger. You might need to take some pics to help out.

Justin, Thank You for the reply! Yes Not the traditional WheelHorse but it still fall's into my requirement of no TORO Logo! lol. I have been able to get better adjustment out of the deck but it looks like I am going to need to make new hangers. The Hangers got thru the Chassis and where they go thru they are rubbing and the threads are worn away and the nut won't stay in place allowing the deck to change during cutting. So I'm off to make some home made rods and I believe this will cure my issue.
Thanks!
Bill

Bhark24 wrote: Justin, Thank You for the reply! Yes Not the traditional WheelHorse but it still fall's into my requirement of no TORO Logo! lol. I have been able to get better adjustment out of the deck but it looks like I am going to need to make new hangers. The Hangers got thru the Chassis and where they go thru they are rubbing and the threads are worn away and the nut won't stay in place allowing the deck to change during cutting. So I'm off to make some home made rods and I believe this will cure my issue.
Thanks!
Bill

Get pics if you can! I’d be interested in seeing how it goes, never have messed with that model.